tag:blogger.com,1999:blog-7302142022228564326.post7866200442428815466..comments2023-07-25T11:48:39.285-04:00Comments on The Free Motion Quilting Project: Building Blocks Piecing TipsLeahhttp://www.blogger.com/profile/03674869334249298532noreply@blogger.comBlogger26125tag:blogger.com,1999:blog-7302142022228564326.post-16419750292380134332014-03-10T11:42:52.196-04:002014-03-10T11:42:52.196-04:00Thank you Leah. I have to stop myself from taking...Thank you Leah. I have to stop myself from taking shortcuts :-) Yes, that helps.Jacqueline Satterleehttps://www.blogger.com/profile/01470812020344179572noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-44542780752173335222014-03-10T11:29:54.271-04:002014-03-10T11:29:54.271-04:00Jacqueline Satterlee - I usually try to knock out ...Jacqueline Satterlee - I usually try to knock out some inner lines first and that helps to spread the fabric from the inside out so less puddling and pleating happens.<br /><br />It is a good idea to baste your quilt securely with pins or spray, whatever your preference. I personally use straight pins and Pinmoors.<br /><br />I hope that helps!<br /><br />LeahLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-39889287405142155702014-03-10T10:46:19.418-04:002014-03-10T10:46:19.418-04:00Hi Leah, I am doing ok on the blocks but I find(in...Hi Leah, I am doing ok on the blocks but I find(in #2 blocks) that I end up with some of the material bunching on the outside edges. Do you stitch the outer edges before or after the inside stitching? Should I spray glue the 3 layers to avoid this? Thank you.Jacqueline Satterleehttps://www.blogger.com/profile/01470812020344179572noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-57277643280523161612014-02-17T21:40:16.556-05:002014-02-17T21:40:16.556-05:00Hi Mabel - Check the manual of your sewing machine...Hi Mabel - Check the manual of your sewing machine for a diagram on proper tension. Usually the middle tension setting for the top works nicely, though this is different for every machine. Leahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-73447848543281301722014-02-17T20:31:20.482-05:002014-02-17T20:31:20.482-05:00Leah,
I set my stitch length at 1.5 but what abou...Leah,<br /> I set my stitch length at 1.5 but what about a tension setting? <br />I seem to get a bird nest and/or spider web designs on the back of my practice square. I have my top thread with very little tension and the bobbin tension is set on low as well. Any suggestions? <br />Thanks!<br />Mabel Anonymoushttps://www.blogger.com/profile/04653155357923370249noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-71393103699589644852014-02-16T11:30:45.747-05:002014-02-16T11:30:45.747-05:00Leah, I measured all the pieces again and I found ...Leah, I measured all the pieces again and I found my mistake. One strip I had cut 2.25 all the others I cut 2.5. The second block came out perfect 6.5 x 6.5!<br />So lesson #1 mark ruler with tape. Lesson #2 Very Important don't sew too late at night makes it too hard to think! LOL<br />Thanks for your reply.Anonymoushttps://www.blogger.com/profile/02897736816245033193noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-53566838358371158442014-02-16T08:47:47.718-05:002014-02-16T08:47:47.718-05:00Hi Denise - When you cut your strips from the ABA ...Hi Denise - When you cut your strips from the ABA and BAB units, are you cutting them 2.5 inches wide?<br /><br />From what it sounds like, this is probably what is going wrong. You're welcome to shoot a picture of the front and back of your blocks and share them on the facebook group and I can take a look to double check.Leahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-67894214365006116442014-02-16T01:32:15.906-05:002014-02-16T01:32:15.906-05:00LEAH PLEASE HELP!!!!
I just sewed the strip piece...LEAH PLEASE HELP!!!!<br /><br />I just sewed the strip pieces for block #2 for the 9 patch blocks. I measured and marked every seam with a ¼” seam allowance line on the fabric. I double and triple checked the cut measurements;<br /><br />The pattern says that Fabric A is supposed to be cut 2.5” wof; Fabric B also cut 2.5” wof<br />Then sew an ABA strip together & then cut 6 pieces at 2.5 wide x 6.5 long of ABA then cut 3 pieces of BAB strip at 2.5 x 6.5 making a total of 3 blocks with a unfinished size of 6.5” ….I am now on my 2nd attempt to do this…<br /><br />I just finished 1 block (out of 3) and they are supposed to end up 6.5 square .again still am getting one side measures 6.5 and the other side measures 6.25. <br />This is the SAME thing that I did last night I ripped all that out checked and sewed and measured everything again then re cut and re sewed the strip and pieces and I am still not getting the finished size 6.5“ sq<br /><br />NO one else in the entire group said they had this problem they said they followed the pattern completely and came out 6.5..<br /><br />I am so perplexed! and feeling so stupid. I am hoping you can tell me what I am doing wrong.<br />Thanks <br />Denise LawrenceAnonymoushttps://www.blogger.com/profile/02897736816245033193noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-71728599843452638352014-01-26T06:07:11.644-05:002014-01-26T06:07:11.644-05:00Hi Ccquilts - Take a look at the video on making t...Hi Ccquilts - Take a look at the video on making the four patch block (#1 - Piece a Four Patch). I carefully line up the seams, pinch to hold them in place, then pin above the seams to secure. I often forget to take out my pins and stitch over them so the seam doesn't shift as it's stitched. It's up to you if you want to rip that seam and restitch it. Your quilt will be beautiful, warm and cuddly no matter what!<br /><br />Cheers,<br /><br />Leah Day Leahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-70373385070432480132014-01-25T20:06:51.499-05:002014-01-25T20:06:51.499-05:00I pieced all three of my blocks, but not one of th...I pieced all three of my blocks, but not one of them meet up in the middle. Is there a trick to getting the seams to match up?ccquiltshttps://www.blogger.com/profile/02393236034228666446noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-49325593508722221612014-01-22T21:33:19.536-05:002014-01-22T21:33:19.536-05:00Hi, I'm Lissa. I just downloaded the pattern a...Hi, I'm Lissa. I just downloaded the pattern and can't wait to get started. I plan on having more colors though. I've never done a quilt-as-you-go quilt so I'm interested in seeing how this turns out. Thanks for creating this pattern for all of us.Anonymoushttps://www.blogger.com/profile/18180602685462178925noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-13981879291632168462014-01-09T21:17:49.601-05:002014-01-09T21:17:49.601-05:00Ms MoomMist, are you talking about your seams open...Ms MoomMist, are you talking about your seams opening at the edges of the blocks? If so, I think you will find that the shorter stitch length of 1.5 that Leah recommends will solve that!Kim Zhttps://www.blogger.com/profile/15338869578211950228noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-32100072853638951882014-01-09T20:05:48.147-05:002014-01-09T20:05:48.147-05:00Ms Moom - I never have an issue with the fabric op...Ms Moom - I never have an issue with the fabric opening at the edges. Have you ever used a scrap charger that I mentioned at the end of the article? <br /><br />One thing I noticed while teaching Josh was how differently he touched and handled the fabric - fairly roughly. I'm always light handed and never pulling, tugging, or even picking a piece up fast. Usually a stack of pieced blocks are carried in a stack or on a cutting board. I rarely carry a block by the edge. Does that make sense? <br /><br />These are small, subtle things, but they do make a difference!<br /><br />Cheers,<br /><br />LeahLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-41306423240774742212014-01-09T17:57:26.206-05:002014-01-09T17:57:26.206-05:00I'm so excited about this quilt along. My fabr...I'm so excited about this quilt along. My fabric arrived today and I'm ready to start cutting. I read the statement of pressing seams open. The only problem I have with that is that I need to be really careful at the edges because I don't backstitch and the seams tend to open when they are trimmed during straightening. This probably will not be an issue as we are going to be quilting them right away. Do you have any tips on how to prevent the seams from opening?Ms MoomMisthttps://www.blogger.com/profile/10122787724968838631noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-63510274750571563912014-01-06T20:07:07.472-05:002014-01-06T20:07:07.472-05:00My last project was pieced with Isacord, and I fou...My last project was pieced with Isacord, and I found the Aurifil much nicer to use tonight. The thread sunk right down into the fabric. Also, I had been using a charger on the last project, but realized I had a straight stitch plate. Lo and behold I don't need the charger when I'm using this plate!Kim Zhttps://www.blogger.com/profile/15338869578211950228noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-17057141857603254452014-01-04T17:38:59.458-05:002014-01-04T17:38:59.458-05:00June D - No, I've never liked piecing with Isa...June D - No, I've never liked piecing with Isacord thread. It certainly can work, and if you like it, go for it! <br /><br />My personal feeling is it just doesn't STICK to the cotton fabric in the same way cotton thread does. Does that make sense?<br /><br />Cheers,<br /><br />Leah DayLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-30732711911540340392014-01-04T15:21:05.865-05:002014-01-04T15:21:05.865-05:00I can't find the list of your older articles, ...I can't find the list of your older articles, but I thought before you had recommended using the same thread for piecing and quilting (Isacord thread). Have you changed your recommendation or have I misremembered? I used thread I bought from you for piecing and quilting and it seemed to work well.<br /><br />Thanks,<br />June<br /><br /><br />June Dhttps://www.blogger.com/profile/04417665719096002149noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-75167138486949012622014-01-04T13:46:48.010-05:002014-01-04T13:46:48.010-05:00Hi Linda E. - In all honesty, it doesn't matte...Hi Linda E. - In all honesty, it doesn't matter which fabric you match the thread to. I ended up matching to Fabric A because it will show up a bit on the surface in block #10. I will make sure to update that section of the pattern so the video doesn't conflict and cause confusion.<br /><br />Thanks for catching it!<br /><br />Leah DayLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-32219967149710222792014-01-04T10:51:05.697-05:002014-01-04T10:51:05.697-05:00Hi Leah,
Just getting started and watched your vi...Hi Leah, <br />Just getting started and watched your video. Noted that "Recommended Materials" on Page 5 says to Match Aurifil 50 wt to Fabric B and the video say to Match to A. This is my first attempt at Patchwork and quilting so I'm rather obsessed with reading all the directions and watching all the videos. My brain says it really doesn't matter, but my OCD says better ask. LOLLinda Ehttps://www.blogger.com/profile/17943610488162987261noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-52154667240769948172014-01-04T08:54:25.502-05:002014-01-04T08:54:25.502-05:00Pati Vitt - When it comes to piecing, there's ...Pati Vitt - When it comes to piecing, there's probably 100 different ways to cut and piece all of these blocks. To a degree, there isn't a "right" or "wrong" way either, so for the most part I picked methods that either were easier to describe / shoot photos for, or made the most logical sense to me.<br /><br />However, if you see a case for an easier way to do something, and you wish to piece a block your own way, definitely do it. When there's a situation like you described - seam / durability issue - I'll make note of it in the video.<br /><br />Just remember that piecing is never a cut and dry thing - there's never just one right way to do this. There's 100 different right ways!<br /><br />Cheers,<br /><br />LeahLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-73285182074467487682014-01-04T08:51:17.526-05:002014-01-04T08:51:17.526-05:00Miss Mango - You can also post pictures to faceboo...Miss Mango - You can also post pictures to facebook and flicker, then share the link to that photo instead. You don't HAVE to have a blog, but it's super fun and easy to set one up so consider it as something fun to do this year. If anything, it will serve as a useful record of your progress!<br /><br />Cheers,<br /><br />Leah DayLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-25251088616696055542014-01-03T23:55:47.045-05:002014-01-03T23:55:47.045-05:00I wanted to share a picture of my first - ok not r...I wanted to share a picture of my first - ok not really my First -maybe my 6th or 7th try at FMQ. But it seems I need to have a blog to be able to post pictures. Is this correct?Miss.Magoohttps://www.blogger.com/profile/05139390713207807065noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-22739546257266963692014-01-03T12:53:33.832-05:002014-01-03T12:53:33.832-05:00Hi Leah,
In reading ahead on the piecing instruct...Hi Leah,<br /><br />In reading ahead on the piecing instructions, it seems to me that first sewing the original sized strips together, and then cutting and piecing those, would be a bit more efficient. For example, in the Fantastic Rail Fence block, piecing all the strips together in the designated order, and then cutting into blocks, would be a bit faster than cutting the strips and piecing each block separately. I'm just curious if there is a "best practices" reason not to do this? You know, like those strips are more likely to pull apart during quilting? Or if you are having us do it the other way as part of the "piecing practice" of this quilt's construction?<br /><br />Thanks!<br /><br />PatiAnonymoushttps://www.blogger.com/profile/06998352099680539722noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-39113297805741399662014-01-03T11:08:48.219-05:002014-01-03T11:08:48.219-05:00PERFECT!!! :-)
Thanks, LeahPERFECT!!! :-)<br />Thanks, LeahAnonymoushttps://www.blogger.com/profile/06127195917401037962noreply@blogger.comtag:blogger.com,1999:blog-7302142022228564326.post-68521150550785273372014-01-02T20:03:00.685-05:002014-01-02T20:03:00.685-05:00Hi Barb - Hmm...this is a bit beyond the scope of ...Hi Barb - Hmm...this is a bit beyond the scope of the pattern, but yes, I do believe this pattern will be perfect for your denim rag quilt idea.<br /><br />The blocks are actually pieced to 10" but only quilted within 8", so you will have 1 inch of play all around. If you trim the blocks to 9 inches, that should give you the 1/2" seam allowance all around the block to connect using your denim rag quilt method.<br /><br />Does that make sense? I can't wait to see what your quilt looks like when it's finished!<br /><br />Cheers,<br /><br />Leah DayLeahhttps://www.blogger.com/profile/03674869334249298532noreply@blogger.com